Beta · Validate all results · Not for decision-making — results may be wrong; have them validated independently before relying on them. Terms
Validation
Checked against published data, on every change.
Every number below is computed by the same solver code you run in the editor, compared with a cited reference, and re-run in continuous integration. A change that pushes any case outside its tolerance cannot ship.
Benchmarks within tolerance
27 / 27
Templates solved in CI
57
Each must converge and close mass to 10⁻⁶ and energy to 0.1 %
Property data
thermo 0.6.0
chemicals 1.5.2 · ChemSep binary parameters
Activity coefficients
Hexane activity coefficient in equimolar hexane/butanone at 333.15 K
DDBST worked problem 5.22a; thermo original UNIFAC documentation
Reference
1.428 –
RHEON · Original UNIFAC
1.4276 –
Water activity coefficient in water/ethanol/benzene at 298.15 K
DDBST P05.09; thermo UNIQUAC documentation, explicit r/q and directional b
Reference
1.5704 –
RHEON · UNIQUAC
1.5704 –
Gas treatment
Methane hydrate onset at 7.2822 MPa with free water
Skoltech recommended methane/water equilibrium curve, thesis Table 3.5 (https://www.skoltech.ru/app/data/uploads/2021/11/thesis2.pdf)
Reference
283.15 K
RHEON · SRK
283.12 K
vdW–Platteeuw/Munck equilibrium screening, structures I/II. This tolerance does not validate plugging kinetics or inhibitor dosage.
Pure-component properties
Water normal boiling point
NIST Chemistry WebBook (IAPWS-95)
Reference
373.12 K
RHEON · NRTL
373.12 K
Water normal boiling point (cubic EOS)
NIST Chemistry WebBook (IAPWS-95)
Reference
373.12 K
RHEON · Peng–Robinson
374.53 K
Cubic equations of state are not tuned for water; use NRTL or Wilson for aqueous liquids.
Benzene normal boiling point
NIST Chemistry WebBook
Reference
353.22 K
RHEON · Ideal / Raoult
353.22 K
Ammonia normal boiling point
NIST Chemistry WebBook
Reference
239.82 K
RHEON · Peng–Robinson
240.09 K
Propane vapour pressure at 300 K
NIST Chemistry WebBook (Lemmon et al. 2009)
Reference
0.9978 MPa
RHEON · Peng–Robinson
0.99743 MPa
Water enthalpy of vaporisation at 1 atm
NIST Chemistry WebBook
Reference
40.66 kJ/mol
RHEON · NRTL
40.651 kJ/mol
Ethanol enthalpy of vaporisation at 1 atm
NIST Chemistry WebBook (Majer & Svoboda 1985)
Reference
38.56 kJ/mol
RHEON · NRTL
39.14 kJ/mol
Custom component: toluene vapour pressure at 350 K from Tc, Pc, ω and Tb only
NIST Chemistry WebBook (Antoine equation, 308–384 K)
Reference
34.79 kPa
RHEON · Ideal / Raoult
34.62 kPa
Entered as a user-defined component, so every property is estimated by corresponding states rather than read from the database.
Phase equilibrium
Ethanol–water azeotrope composition at 1 atm
Gmehling et al., Azeotropic Data (2004)
Reference
0.894 mol/mol
RHEON · NRTL
0.87578 mol/mol
Binary parameters from the ChemSep NRTL database.
Ethanol–water azeotrope temperature at 1 atm
Gmehling et al., Azeotropic Data (2004)
Reference
351.3 K
RHEON · NRTL
351.33 K
2-Propanol–water azeotrope composition at 1 atm (UNIFAC-estimated pair)
CRC Handbook of Chemistry and Physics, azeotropic data (87.7 wt %)
Reference
0.681 mol/mol
RHEON · NRTL
0.65106 mol/mol
Not in ChemSep: the NRTL parameters are fitted to UNIFAC automatically.
2-Propanol–water azeotrope temperature at 1 atm (UNIFAC-estimated pair)
CRC Handbook of Chemistry and Physics, azeotropic data (80.3 °C)
Reference
353.45 K
RHEON · NRTL
353.19 K
1-Propanol–water azeotrope composition at 1 atm (UNIFAC-estimated pair)
CRC Handbook of Chemistry and Physics, azeotropic data (71.7 wt %)
Reference
0.432 mol/mol
RHEON · NRTL
0.41727 mol/mol
Not in ChemSep: the NRTL parameters are fitted to UNIFAC automatically.
Acetonitrile–water azeotrope temperature at 1 atm (UNIFAC-estimated pair)
CRC Handbook of Chemistry and Physics, azeotropic data (76.5 °C)
Reference
349.65 K
RHEON · NRTL
348.61 K
Not in ChemSep: the NRTL parameters are fitted to UNIFAC automatically.
Reference equations of state
Saturation temperature of water at 10 bar (steam tables)
IAPWS-95 (Wagner & Pruß 2002), cross-checked with CoolProp 7.2
Reference
453.03 K
RHEON · Steam
453.03 K
Steam turbine exhaust quality: 40 bar, 500 °C expanded isentropically to 1 bar
IAPWS-95 (Wagner & Pruß 2002), cross-checked with CoolProp 7.2
Reference
0.956 –
RHEON · Steam
0.95597 –
Methane density at 300 K and 100 bar
Setzmann & Wagner (1991) reference EOS, via CoolProp 7.2
Reference
75.18 kg/m³
RHEON · Peng–Robinson
77.128 kg/m³
A cubic EOS is typically within a few per cent for light gases.
Supercritical CO₂ density at 320 K and 100 bar
Span & Wagner (1996) reference EOS, via CoolProp 7.2
Reference
448.3 kg/m³
RHEON · Peng–Robinson
423.49 kg/m³
Near the critical point cubic equations of state lose accuracy (here ~5 %); use a reference EOS for dense-phase CO₂ pipeline design.
CO₂ vapour pressure at 280 K
Span & Wagner (1996) reference EOS, via CoolProp 7.2
Reference
4.1607 MPa
RHEON · Peng–Robinson
4.1597 MPa
Reaction equilibrium
Ammonia at equilibrium, 450 °C and 10 atm (3:1 H₂:N₂)
Larson & Dodge, J. Am. Chem. Soc. 45 (1923) 2918
Reference
2.04 mol %
RHEON · Ideal / Raoult
2.0789 mol %
Gibbs reactor; ideal-gas fugacities are adequate at 10 atm, not at 300 atm.
Water–gas shift CO conversion at 800 K (equimolar CO/H₂O)
Moe, Chem. Eng. Prog. 58 (1962) 33: ln Kp = 4577.8/T − 4.33
Reference
0.6673 –
RHEON · Ideal / Raoult
0.67253 –
Unit operations
Heater duty, liquid water 25 → 75 °C
IAPWS-95 saturated-liquid enthalpies (steam tables)
Reference
3.768 kJ/mol
RHEON · NRTL
3.8676 kJ/mol
Adiabatic mixing of equal water flows at 300 K and 350 K
Energy balance; liquid water cp varies < 0.3 % over 300–350 K
Reference
325 K
RHEON · NRTL
325.22 K
Isentropic compression of nitrogen, 1 → 3 bar from 300 K
Ideal-gas isentropic relation, T₂ = T₁ (P₂/P₁)^((γ−1)/γ) with γ = 1.40
Reference
410.6 K
RHEON · Peng–Robinson
410.39 K
What this suite has already caught
Benchmarks only matter if they can fail. Building this suite exposed three model errors that ordinary tests had not, and each one is now fixed.
Reaction equilibria at temperature
Gibbs and equilibrium reactors approximated each species' formation Gibbs energy with a constant-entropy shortcut. Ammonia at 450 °C and 10 atm came out at 4.0 % instead of the measured 2.0 %. Gibbs energies are now integrated rigorously from heat-capacity correlations.
Latent heats in activity models
Ideal, NRTL and Wilson derived latent heat from the vapour-pressure slope, putting water 1.6 % and ethanol 5 % above NIST. They now use tabulated enthalpies of vaporisation, which moves column and evaporator duties.
Bubble points at an azeotrope
The flash library's bubble-point solver fails exactly at the ethanol–water azeotrope, and a near-zero vapour-fraction retry silently converged 34 K low. A bracketed fallback now finds the true bubble point, and columns use it.
How to read this page
Tolerances reflect what the model class can be expected to do, not a fit to the reference: a cubic equation of state is held to 2 K on water's boiling point because it is not built for water, and the page says so. Every solve in the editor also gets its own results health check — balance closure, convergence and whether the property package suits the components — so you can judge an individual result, not just the engine.
Missing a case that matters to you? Tell us and we will add it to the suite.