Beta · Validate all results · Not for decision-making — results may be wrong; have them validated independently before relying on them. Terms
Process simulation guide
Chemical process simulation, in your browser.
A process simulator connects chemical properties, equipment models and mass and energy balances. RHEON brings that workflow into a visual web workspace, so you can move from a process idea to a model you can inspect and share.
What is chemical process simulation?
Chemical process simulation represents a process as connected unit operations: pumps, exchangers, separators, reactors, columns and other equipment. Thermodynamic methods estimate material properties, while unit models and solvers calculate how streams change across the flowsheet. Engineers use these models to explore designs, compare operating conditions and understand interactions between equipment.
A steady-state model describes conditions that do not change with time. Dynamic simulation studies how a process evolves over time. RHEON includes both workflows; this guide starts with a steady-state flowsheet because it makes the components, specifications and balance calculations easier to inspect.
1. Define the components and thermodynamics
Choose the chemical components in your process and a property package suited to the mixture and operating conditions. RHEON includes Ideal/Raoult, Peng–Robinson, SRK and NRTL packages. Package selection affects phase equilibrium, enthalpy and the results of downstream equipment models.
2. Build the process flowsheet
Place unit operations on the visual canvas and connect material and energy streams. Start with a feed, add the equipment that represents your process, and finish with product streams. Templates help you explore separation, reaction, heat exchange and recycle cases before building your own model.
3. Specify operating conditions
Enter feed composition, temperature, pressure and flow, then provide the required specifications for each unit operation. The model needs enough independent specifications to solve. Check missing inputs, disconnected streams and topology diagnostics before running it.
4. Solve the mass and energy balances
Run a steady-state calculation to find stream conditions and equipment duties. RHEON supports sequential modular solving with recycle convergence and an equation-oriented mode. A converged solution is a numerical result: it still needs engineering review of assumptions, property methods and operating limits.
5. Inspect, compare and share
Review temperatures, pressures, compositions, phase fractions and energy duties. Use results-health checks, thermodynamic plots and process studies to investigate the model. Save versions, export results and share a read-only flowsheet when you want someone else to review the process.
Review the model as well as the result.
RHEON is currently in beta. Reference benchmarks help you assess the implemented models, but they do not establish validity for every chemical system or operating regime. Check property-package suitability, units, phase behaviour, convergence and balance closure against appropriate reference data before relying on a study.
Inspect the validation benchmarks →